Ravel RE-2504 Installation, Commissioning & Operating User Manual page 44

4.2.1.3. Settings:
screen, system enters into the settings mode. In this
mode following are changeable; they are Title,
Location Program, Password and Date & Time. When
you enter into this mode the screen will be as below.
4.2.1.3.1. Title:
4.2.1.3.2. Location Program:
By selecting the number 4 from the program
1. Title
2. Location Program
3. Password
4. Date & Time
By selecting the number 1 from the Settings
screen, system enters into the Title change mode.
The Title of the Panel shown in the system healthy
screen can change by over writing on the existing
name. Press key 1 from settings screen to change
the title, Change the title using alphanumeric key
pad. The maximum 20 character can be entered
in title. Then press the Enter key to accept the
changes. When you enter into this mode the
screen will be as below.
Title:
Ravel Electronics
By selecting the number 2 from the Settings
screen, system enters into the Location Program
change mode. This mode is used to enter the
name of the zone location of the particular zone.
When you enter into this mode the screen will be
as below.
Loc: 1 2 3 4 5 6 7 8
<loc. not Entered>
43
RE / DD / UM / 2508 V1.2- 01