11
Clearance between presser foot and needle plate
.05.29
Requirement
With the presser bar lifter 1 raised, there must be a clearance of 7 mm between the
presser foot and the needle plate.
5
1
Fig. 11 - 30
Raise the presser bar lifter 1.
Lift presser rod 2 and push the 7 mm thick blade of the adjustment gauge 3
(Order No. 61-111 642-19) under the presser foot.
Push down presser rod lifter bracket 4 (screw 5) until contact is achieved.
3
4
4
1
2
Adjustment
3
11 - 32