Physical Details - Icamera-1000-Adt; Front Panel - ADT Pulse iCamera-1000 Installation Manual

Physical Details – iCamera-1000-ADT

Front Panel

1. Light Sensor
2. IR LEDs
3. Day Camera Lens
4. Night Camera
Lens
5. Power/Wi-Fi
(green)
6. Network LED
(green)
ADT Pulse Interactive Solutions
®
iCamera-1000-ADT Indoor Low-Light Camera Installation Guide
Figure 1: Front Panel
Detects lighting conditions
The LEDs help you see clearly at night or in a dark
environment.
The Day Camera Lens is used in a bright environment.
The Night Camera Lens is used in a dark environment.
On - Power on
Off - Power off
Blinking - Data is being transmitted or received
Blinking Slow - Weak strength of Wi-Fi signal
(1/2 Hz, SNR < 15 dB)
Blinking Medium - Strength of Wi-Fi signal is normal.
(1/2 Hz, SNR < 15 dB)
Blinking Fast - Good strength of Wi-Fi signal. (1/2 Hz,
SNR < 15 dB)
On - Power on
Off - No Active connection on the LAN port, or not
associated with Wireless AP
3