Table of Contents
Advertisement
iCamera-1000-ADT Indoor Low-Light Camera Installation Guide
iCamera Wall Mounting Instructions (continued)
4. Hook the two mounting holes on the stand into the mounting screws.
5. Attach the iCamera Stand
Locate the stand mount on the back of the iCamera. Fasten the stand by
turning the iCamera counterclockwise until secured.
6. Mounting the iCamera
Connect the PoE cable into the LAN port of the device.
7. Connect the other end of the PoE cable to the adapter through the holes of
the stand and the wall. Adjust it to the desired position and secure the
iCamera firmly.
12
ADT Pulse
Interactive Solutions
®
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the iCamera-1000 and is the answer not in the manual?