Device Activation; Key Pad Lock Out - Cane Crono User Manual

10
20
10
20
10
2 0
10
2 0

DEVICE aCTIVaTIOn

When you insert the battery, the pump starts a sequen-
ce of activation during which:
• The pump will carry out a self-test with brief acoustic
signals and all symbols will appear on the screen
• The pump's pusher will place itself in the correct
starting position and at the end of this self-adjusting
OFF will appear on the screen.
The pump is supplied with a battery already inserted.
Refer to the relevant paragraph for instructions how to
insert a new battery (see page 40).
Put the pump back in the pump case if it is not going to
been used for a long period of time (1-2 months) and
remove the battery.

KEY PaD lOCK OUT

The Crono FE pump has 2 lock levels:
• L 0: permits complete access to all settings and
operating functions.
• L 1: permits restricted control of operating functions.
Before proceeding to the pump settings make sure that
the lock level selected is L 0.
Procedure to lock/unlock the key-pad:
1. Depressing the
nOTE
button for about 7 seconds with
22
MAN 01/04 CRONO FE 03/11