Table of Contents
Advertisement
EPG - ELECTRONIC PROGRAMME GUIDE
and if available you can use the
The
button allows you to look ahead in 15 minute steps to future programmes for the channels
(press the
button to return to the current time).
If you wish to view the programme currently being shown on a channel, you need not exit the EPG,
just select the desired channel and press the
current TV picture for the selected channel. The picture however only appears once the
been pressed – previously what you saw was the picture of the old channel that had previously been
selected, even though the EPG was no longer set to that channel.
"COMING UP" VIEW (PROGRAMME LISTINGS)
The "Coming up" view (programme listings) can be called up at any time in EPG by pressing
the
(yellow) button.
Also pay attention to the bars
at the bottom of the on-screen
display! This provides hints on
what to do next.
In the "Coming up" view you will see all the programmes that will be shown in the previous "Current" list
of selected channels. Provided that EPG data has been supplied by the channel provider, the receiver
shows the programmes that will be shown on the selected channel for several days in advance.
You can use the cursor buttons (
use the
button to call up further information on the desired programme.
You can use the
(the channels can also be selected by inputting digits with the keypad); you remain however in "Coming
up".
The
button allows you to scroll backwards and forwards a day at a time.
Using the red dot
"Recording").
28
button to call up further information on the desired programme.
buttons to scroll through the channels in the order of the overall channel list
button you can load the selected programme into the recording settings (see item
button. At the top right of the screen you will see the
) to select the desired programme and if available you can
button has
Advertisement
Table of Contents
