Table of Contents
Advertisement
Initial settings
OSD language
LNB supply voltage
Note
LNB supply voltage in standby
Programme selection
Note
On Screen Displays (OSD)
28
When making the setting, it should be ensured that there is at least one blank
channel above and below the output channel in order to avoid interference.
Here you can select the language for the on-screen displays. The choice available
comprises: German, English and French.
Default: German
Here you can turn off the power supply for the feed system if this is catered for by
an external power supply and signal selection likewise is not carried out through
the LNB supply voltage (e.g. Kathrein single-cable feed system UAS 330).
If there are switchover matrices in the receiving system the LNB supply voltage
needs to be turned in all cases.
Default: ON
When the receiver is in standby the LNB supply voltage is normally switched off.
If terrestrial signals and satellite signals are combined in the receiving system, and
the power supply for the relevant components comes from the receiver, this power
supply must also be guaranteed when the receiver is in standby.
In this case switch the power supply in standby to "On".
Default: "Off".
You have the option of entering the programme number in one-, two-, or three-digit
form or as unrestricted input
Default: "free".
Setting
One-digit input
Two-digit input
Three-digit input
Free input
If a recording is pre-programmed in the timer for a programme slot 100, the timer
must be cleared first in order that a change in the programme slot entry can be car-
ried out.
Here you can select whether the programme slot and programme name are to be
displayed continuously, or whether they are to be removed again approximately
three seconds after programme changeover.
This setting can be made differently in TV mode and radio mode.
Default:
TV mode
Analogue radio mode
To call the initial setup menu in analogue radio mode, the receiver must be
switched into radio mode before being switched off. Then call the initial setup menu
in the usual way.
Settable programme slots
Programme slots 1 to 9
Programme slots 1 to 99
Programme slots 1 to 250
Programme slots 1 to 250
"Off".
"On".
Advertisement
Table of Contents
