Low Severity Lockout - M86 Security Threat Analysis Reporter User Manual

C S
ONFIGURATION ECTION
74
C 2: C
HAPTER USTOM
• High - This selection locks out the end user from all
network access (see Medium and High severity
lockout).
4. After performing the additional steps based on the
chosen lockout Severity level, click Lockout at the
bottom of the frame to open the Info alert box with the
message: "This user has been locked out."
5. Click OK to close the alert box and to lock out the user
from the designated library categories/ports for the spec-
ified duration of time.

Low severity lockout

If a "Low" Severity lockout was selected, the Available
Threats/Groups box displays. Do the following:
• If using the URL tab, choose the library category/catego-
ries from the list. Up to 15 categories or one threat group/
class can be added.
• If using the Bandwidth tab, make a selection from the
protocols in the list.
You can also enter a port number in the Port Number
field, or modify the value in that field by clicking the up/
down arrows to increment/decrement the current value
by one, and then click add port > to include the port
number in the Assigned Threats/Groups frame. Up to 15
port numbers can be added.
NOTE: In the Available Threats/Groups box, a global adminis-
trator will not see the "All Categories" selection for URL gauges,
nor see the "All Protocols" selection available for bandwidth
gauges. In order to lock out end users using either of these selec-
tions, a "Medium" severity lockout should be used.
G S , U
AUGE ETUP SAGE
M86 S U G
ECURITY SER UIDE