Confirm Password - M86 Security Threat Analysis Reporter User Manual

4. In the Main Administrator section, type in the following
5. In the Bandwidth Range section, type in the IP Address
TIP: To remove the IP address range, select it from the list box
and then click Remove.
6. In the Web Filter Setup section, type in the Server Name
TIPS: To add another Web Filter, follow the instructions in step 6
above. To remove a Web Filter from the list box, select it and then
click Remove. To make a Web Filter the Source server—if no
Web Filter in the list has yet been specified as the Source server,
or if the IP address of the Source server has changed—select the
Web Filter from the list box and then click Set as Source.
M86 S U G
ECURITY SER UIDE
A
DMINISTRATION
Fig. 4:4-7 Wizard screen
information: Username, Email address, Password,

Confirm Password.

and Subnet Mask, and then click Add to include the
bandwidth IP address range in the list box below.
and Server IP address, indicate if this Web Filter will be
Set as Source, and then click Add to include the server
criteria in the list box below.
S C 4: P
ECTION HAPTER
B , R
ERFORM ACKUP ESTORATION
133