Step 2: Verify The Failed Drive In The Admin Console - M86 Security Threat Analysis Reporter User Manual

A S
PPENDICES ECTION
168
A C
PPENDIX

Step 2: Verify the failed drive in the Admin console

The Hardware Detector panel in the Administrator console
is accessible via the Administration > Hardware Detector
menu selection:
Fig. C-1 Hardware Detector panel, failed hard drive detected
The Hardware Detector panel displays the current RAID
Array Status for the two hard drives (HD 1 and HD 2).
Normally, when both hard drives are functioning without
failure, no text displays above the hard drive number.
However, if a hard drive has failed, the image of the drive
displays with a yellow triangle containing a red exclamation
point, and the message "FAIL" above the hard drive number.
Before taking any action in this panel, proceed to Step 3.
M86 S U G
ECURITY SER UIDE