Procedures For Logging On, Off; Access The Tar Administrator Login Window - M86 Security Threat Analysis Reporter User Manual

Procedures for Logging On, Off

Access the TAR Administrator Login window

1. Launch an Internet browser window supported by TAR.
NOTE: If pop-up blocking software is installed on the workstation,
it must be disabled. Information about disabling pop-up blocking
software can be found in Appendix A: Disable Pop-up Blocking
Software.
2. In the address line of the browser window, type in
3. After accepting the security certificate, click Go to open
M86 S U G
ECURITY SER UIDE
"https://" and TAR's IP address or host name, and use
port number ":8443" for a secure network connection,
plus "/8e6tar/".
For example, if your IP address is 210.10.131.34, type in
https://210.10.131.34:8443/8e6tar/. Using a host name
example, if the host name is logo.com, type in https://
logo.com:8443/8e6tar/.
With a secure connection, the first time you attempt to
access the TAR user interface in your browser you will be
prompted to accept the security certificate. In order to
accept the security certificate, follow the instructions at:
http://www.m86security.com/software/8e6/docs/ig/
misc/sec-cert-tar.pdf
the TAR Login window (see Fig. 1:1-1).
I S
NTRODUCTORY ECTION
G S
ETTING TARTED
11