Step 4: Rebuild The Hard Drive - M86 Security Threat Analysis Reporter User Manual

A S
PPENDICES ECTION
170
A C
PPENDIX

Step 4: Rebuild the hard drive

A. Once the failed hard drive has been replaced, return to
the Hardware Detector panel in the Administrator
console, and click Rebuild Now to open the Results alert
box:
Fig. C-2 Hardware Detector panel, initiate Rebuild process
The Results alert box displays the following messages if
the RAID rebuild proceeds as expected: "RAID rebuild
process starting. Rebuild has completed successfully. It
will take approximately two hours for the RAID array to
finish reconstruction."
B. Click OK to close the Results alert box and to continue
with the RAID array reconstruction process.
WARNING: When the RAID array reconstruction process begins,
the Administrator console will close and the hard drive will
become inaccessible.
M86 S U G
ECURITY SER UIDE