A
S
PPENDICES
ECTION
Appendix B
System Tray Alerts: Setup, Usage
152
A
B
PPENDIX
This appendix explains how to set up and use the feature for
System Tray alerts. A TAR Alert is triggered in an adminis-
trator's System Tray if an end user's Internet usage has
reached the upper threshold established for a gauge set up
by that administrator.
This feature is only available to administrators using an
LDAP username, account, and domain, and is not available
if using IP groups authentication.
NOTE: In order to use this feature, the LDAP Username and
Domain set up in the administrator's profile account (see Chapter
3 in the Preliminary Setup Section) must be the same ones he/she
uses when logging into his/her workstation.
LDAP server configuration
Create the System Tray logon script
Before administrators can use the TAR Alert feature, an
administrator with permissions on the LDAP server must
first create a logon script on the LDAP server for authenti-
cating administrators.
1. From the taskbar of the LDAP server, go to: Start > Run
to open the Run dialog box:
Fig. B-1 Run dialog box
M86 S
U
G
ECURITY
SER
UIDE