Advertisement
Connection Type
1. Select the Connection type: default "PPPoE" with Encapsulation "LLC/SNAP"
2. If the customer is not able to browse after rebooting the router with the settings above
then change this connection type to "PPPoA" With Encapsulation type being "VC/MUX"
and save and reboot the router again, this should then bring them up online, if not then
there is a fault on the service.
3. Select "Next"
Continue to next page.
ClubTelco Setup Support
TP-Link 8840 ADSL & ADSL2+
Configuration Setup Guide
Advertisement
