Advertisement
Quick Links
Configuration Setup Guide
Connect your TP-Link 8840 as per as per the instructions in your quick installation guide.
• Connect the power adapter and turn on your TP-Link 8840 Modem/Router.
• Connect your ADSL Enabled phone line.
Follow these simple steps to configure your TP-Link 8840 Modem/Router to connect to the
ClubTelco ADSL and ADSL2+ service.
1. Open your internet explorer.
2. In the address line type
3. Log into the TP-Link 8840 modem with username "admin" and password "admin"
http://192.168.1.1
and select enter.
ClubTelco Setup Support
TP-Link 8840 ADSL & ADSL2+
Configuration Setup Guide
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for TP-Link 8840
Summary of Contents for TP-Link 8840
- Page 1 Configuration Setup Guide Configuration Setup Guide Connect your TP-Link 8840 as per as per the instructions in your quick installation guide. • Connect the power adapter and turn on your TP-Link 8840 Modem/Router. • Connect your ADSL Enabled phone line.
-
Page 2: Wide Area Network (Wan) Setup
ClubTelco Setup Support TP-Link 8840 ADSL & ADSL2+ Configuration Setup Guide Wide Area Network (WAN) Setup You will then be presented with the main information screen. 1. Select “WAN” from the side menu. 2. Then select “Edit” on the far right hand side (shown by a red box). -
Page 3: Atm Pvc Configuration
ClubTelco Setup Support TP-Link 8840 ADSL & ADSL2+ Configuration Setup Guide ATM PVC Configuration 1. Ensure VPI is set to “8” 2. Ensure VCI is set to “35” 3. Click “Next”... -
Page 4: Connection Type
ClubTelco Setup Support TP-Link 8840 ADSL & ADSL2+ Configuration Setup Guide Connection Type 1. Select the Connection type: default “PPPoE” with Encapsulation “LLC/SNAP” 2. If the customer is not able to browse after rebooting the router with the settings above then change this connection type to “PPPoA”... - Page 5 ClubTelco Setup Support TP-Link 8840 ADSL & ADSL2+ Con guration Setup Guide PPP Username and Password Set up the customers username and password information into the elds shown below MTU must be “1460” PPPoE service name “can remain blank” Select “Next...
- Page 6 ClubTelco Setup Support TP-Link 8840 ADSL & ADSL2+ Configuration Setup Guide Enable IGMP Multicast and WAN Service 1. Tick Enable WAN Service. 2. Add Service Name “pppoe_8_35. 3. Click “Next”.
- Page 7 ClubTelco Setup Support TP-Link 8840 ADSL & ADSL2+ Configuration Setup Guide WAN Setup Summary 1. Select “Save” to update settings. WAN Setup Confirmation Select “Save and Reboot” and this will save your settings and reboot the router.
- Page 8 ClubTelco Setup Support TP-Link 8840 ADSL & ADSL2+ Configuration Setup Guide DSL Router Reboot You will now be advised that the router is saving and rebooting, this process may take up to 2 minutes to complete. Once you have a solid ADSL light you are ready to browse the...
Need help?
Do you have a question about the 8840 and is the answer not in the manual?
Questions and answers