Clearing The Alarms - DSC PC6010 User Manual

3.2 Clearing the Alarms _____________________________________________________________

This section explains how to acknowledge and clear alarms.
Step 1. If you enter your code, or have turned off area(s) after an alarm has occurred, the
keypad displays:
There are Alarms
View Alarm List?
If you press
If you press
since the area(s) were last armed. For example,
Area 1
Zone 1
Step 2. Use the
the keypad displays:
End of List
Clear Alarms?
Step 3. If you do not want to clear the alarm memory, press
returns to the display in step 1.
To clear the alarm memory, press
Detector Reset
In Progress
The keypad returns to the main menu.
If the keypad displays
Unable to Clear
All Alarm(s)!
the system was unable to reset one or more detectors. Report the problem to a
Supervisor or Master user.
, the keypad displays the next menu item.
, the keypad displays the list of alarms that have occurred
>
buttons to view each alarm. When you come to the end of the list,
then
. The keypad
. The keypad displays:
Alarm(s) Now
Cleared!
13
3: Silencing and Clearing Alarms & Faults