Viper FANG 18 C User Manual page 6

ENGLISH
Use of the cleaner is subject to current national regulations. besides the operating instructions and binding accident prevention regu-
lations valid in the country of use, observe recognized regulations for safe and proper work.
TrANSpOrT
when transporting the cleaner in elevators
− observe current safety regulations, in particular with regard to carrying capacity.
OpErATION
take all necessary precautions to prevent hair, jewels and loose clothes from being caught by the machine moving parts.
before using the machine, close all doors and/or covers.
the machine working temperature must be between 0°C and +40°C.
the humidity must be between 30% and 95%.
do not use the machine as a means of transport.
In case of fire, use a powder fire extinguisher, not a water one.
do not tamper with the machine safety guards and follow the ordinary maintenance instructions scrupulously.
do not allow any object to enter into the openings. do not use the machine if the openings are clogged. always keep the openings
free from dust, hairs and any other foreign material which could reduce the air flow.
Do not remove or modify the plates affixed to the machine.
if the machine is used according to the instructions, the vibrations are not dangerous. the machine vibration level is less than 2.5 m/s
(98/37/EEC-En 1033/1995).
the Hand/arm vibration levels are well below 2,5 m/s
working period.
this machine must not be used on roads or public streets.
viper will not pay any claims regarding using aggressive detergents in viper machines.
pay attention during machine transportation when temperature is below freezing point. the water in the tank or in the hoses could
freeze and seriously damage the machine.
MAINTENANCE
to ensure machine proper and safe operation, the scheduled maintenance shown in the relevant chapter of this manual, must be
performed by the authorised personnel or by viper service Center.
Carefully read all the instructions before performing any maintenance/repair procedure.
do not work under the lifted machine without supporting it with safety stands.
do not wash the machine with direct or pressurised water jets, or with corrosive substances.
GUArANTEE
our general conditions of business are applicable with regard to the guarantee.
Unauthorised modifications to the appliance, the use of incorrect brushes and detergents in addition to using the appliance in a way
other than for the intended purpose exempt the manufacturer from any liability for the resulting damage.
TESTS ANd ApprOvALS
Electrical tests must be performed in accordance with the provisions of safety regulations (bgv a3) and to din vdE 0701 part 1 and part 3.
In accordance with DIN VDE 0702 these tests must be performed at regular intervals and after repairs or modifications.
ELECTrICAL COMpONENTS
dANGEr
Electric shock due to faulty mains connecting lead.
touching a faulty mains connecting lead can result in serious or even fatal injuries.
do not damage the mains power lead (e.g. by driving over it, pulling or crushing it).

regularly check whether the power cord is damaged or shows signs of ageing.

Have the faulty mains connecting lead replaced by your Viper service representative or a qualified electrician prior

to using the appliance again.
CAUTION
Electrical components.
damage due to unsuitable mains voltage.
the appliance can be damaged as a result of being connected to an unsuitable mains voltage.
Ensure that the voltage shown on the rating plate corresponds to the voltage of the local mains power supply.

6
USER MANUAL
(measured according to iso 5349), which is the limit for an 8 hour continuous
2
FANG 18C
80188EU (1) – 2012-04-10
2