Product Outline; Configuration - Olivetti AR-FN6 Service Manua

[1] PRODUCT OUTLINE

This unit is installed to one of the following machines to serve as an after-process unit of output paper of a printer, copier or FAX machine.
This unit allows to shift each bundle of paper printed in the page sequence or sorted by each page.
It also allows to staple a bundle of paper sorted in the page sequence.
d-copia3501/3501MF/4501/4501MF/351/351N
Applicable models

[2] CONFIGURATION

1. Before installing this unit, one of the multi-purpose tray (AR-MU2), the large capacity paper feed desk (AR-D28), and the 3-stage paper feed desk
(AR-D27) must be installed in advance.
2. This unit cannot be installed together with the male bin stacker (AR-MS1) and the upper exit tray extension (AR-TE4).
Exit tray
(AR-TE3 or AR-DU4 Standard)
Duplex module
(AR-DU3)
Simultaneous
installation
not allowed
Saddle stitch
finisher
(AR-FN7)
Stand/3 x 500 sheet
paper drawer
(AR-D27)
Output units
Finisher
*1
=Any of the units must be installed together.
Y105620-2
B/W scanner module/DSPF (AR-EF3)
Duplex
module/bypass tray
(AR-DU4)
AR-FN6
Upper exit tray
extension
(AR-TE4)
Simultaneous installation
not allowed
Multi purpose drawer
(AR-MU2)
Simultaneous installation
is required
*1
1-1
Finisher
(AR-FN6)
Mail-bin stacker
(AR-MS1)
Stand/MPD & 2000 sheet
paper drawer
(AR-D28)
Service Manual