Operational Descriptions - Olivetti AR-FN6 Service Manua

[7] OPERATIONAL DESCRIPTIONS

1. Paper transport path
A. Machine paper exit reverse (Switchback)
When the duplex print or the left side paper exit tray is selected, paper is
once discharged to the interface unit and then switched back.
B. Paper exit to the upper tray
In the normal paper exit operation, paper is discharged to the upper tray.
C. Paper exit to the lower tray
When stapling or offset operation is performed, paper is discharged to
the lower tray.
2. Descriptions of each section
The finisher is composed of (1) upper paper transport section, (2)
alignment tray section, and (3) tray 2 paper exit section.
Offset and stapling (3 positions) can be performed with paper exit to tray
2 as well as the selected tray by the command from the machine.
(1) Upper paper transport section
(2) Alignment tray section
Stapler
7-1
!
(3) Tray 2 paper exit section