Panel Function Description
1. Power SOCKET (12V DC) : Attach the power socket here.
2. Reset : Press the Reset button once to restart the system, The LED except Power indicator will be off
before restarting.
3. LAN(POE) : Clients devices connect to WHG-1000 via LAN ports
4. WAN1/WAN2 : Two WAN ports are available on the system.
5. Console : The serial RS-232 DB9 cable attaches here.
6. Scan Button :
Press and hold the Reset button for 3 seconds until the STATUS LED FLASH and release to
Scan New AP's Channel.
Press and hold the Reset button for more than 10 seconds until the SYSTEM LED FLASH and
release to reset the system to default configurations.
7. USB : (option)
300Mbps Wireless PoE Hotspot Gateway
WHG-1000
Front Panel
4
Quick Installation Guide