3. Getting Started
Step :
1. Once the hardware installation is done, set DHCP in TCP/IP of the administrator's PC to get an IP
address automatically. Connect the PC to the LAN(PoE) port of WHG-1000. An IP address will be
assigned to the PC automatically via the WHG-1000.
2. Launch a web browser to access the web GUI of WHG-1000 by entering "http://192.168.2.254" in the
address field.
3. The following Administrator Login Page will appear. Enter "root" in the Username field, and "default" in
300Mbps Wireless PoE Hotspot Gateway
WHG-1000
the Password field.
7
Quick Installation Guide