Getting In And Out; Free Wheel Lever - Handicare Trophy 3W User Manual


If you observe anything unusual
while driving, release the throttle
and take the key out of the
ignition once you have stopped.
3.2

Getting in and out

1. Make sure the scooter is switched
off electrically.
2. Put the free wheel handle in the
D position.
RIVE
Tiller angle adjustment
Pull the handle (B) for the tiller angle
adjustment (C) and push the tiller
forward.
Turning the seat
1. Move handle (A) forward and turn
the seat 90° to the left or the right.
The seat will lock automatically
when turned 90°.
2. Now seat yourself on the seat.
3. Turn the seat back as described
above. When the seat has been
turned to its original position, it will
click back into place.
Folding up armrests
The armrest can be folded up so that
you can get in and out sideways.
Operating instructions
Sliding seat adjustment
Pull up the handle (D) and move the
seat forward or backward into a
comfortable position.
Switch of the scooter electrically
before you get in or out! This way
you will avoid that the scooter
starts to move when you
accidentally squeeze an operating
handle.
3.3

Free wheel lever

Put the free wheel lever (A) in the
D position (B) to be able to drive
RIVE
the scooter electrically.
To be able to push the scooter, put the
free wheel lever in the Push (C)
position.

Never put the scooter in the
Drive position when you are
parked on a slope. When the
scooter is parked on a slope that
is too steep, it can start moving
down the slope.

After pushing, the free wheel
lever should immediately be
returned to the Drive position.
19