Comtrend Corporation CT-5365 Installation Manual page 6

Start using your ADSL...
5. Connecting the computer to the router. Two options are available
You may either connect your computer to the router using an Ethernet cable if they are
sufficiently close to each other or by means of a wireless network. Furthermore, you can
simultaneously have certain items of equipment connected to the router using the Ether-
net cable and others as portable through the wireless network.
A. Connection using wireless network
You can use the wireless network as long
as your computer is equipped with a wire-
less adapter installed or this is integrated
into your equipment.
The first step will be to enable the wireless
network for your router. This is done by
pressing the button
of the router four or five (4 or 5) seconds.
The WLAN indicator will light up in green
and will blink when transferring data.
WPS
WPS
The next step is to configure the compu-
ters on your wireless network in accordan-
ce with your router's wireless parameters.
For further information please refer to sections 3.5 of the user's manual on the
Advanced Settings CD
6
located at the front
WLAN LAN 1X LAN 2X LAN 3X LAN 4X ADSL ALARMA
The configuration parameters by default
for your wireless network are shown on
the label at the bottom of your router.