Display View - Gree DC Inverter Multi VRF Service Manual

DC INVERTER MULTI VRF

5.3 Display View

No. Display name
1 Control mode
2 Running mode
3 Error
4
5 Fan speed display
6 Swing
7 Timer
8 No. of indoor unit
9 Room temp.
10 Shield
11 Force
12 (room temp.)
Room temp. or error
13
code
(Fig.5.3)
Inquiry state, "INQUIRY" is displayed.
Single control state,"SINGLE" is displayed.
Centralized control state, "CENTER" is displayed.
Each indoor unit running mode is displayed.
"ERROR" is displayed during any malfunction to indoor or outdoor unit in a
group.
" " is displayed when there is no malfunction to selected indoor unit and the
ambient temp. is below zero.
Hi, mid, low or auto speed of indoor fan is displayed.
Swing running of indoor unit is displayed.
"TIMER ON/OFF" is displayed when setting timer or inquiring timer state.
Under inquiry state, No. of online indoor units are displayed and No. of selected
indoor unit will blink.
Under single control state, only No. of selected indoor unit is displayed.
Under centralized state, No. of all online indoor units are displayed.
"ROOMTEMP" is displayed for no malfunction, but isn't for malfunction.
Centralized controller
A. Under inquiry state," SHIELD" will be displayed when selected indoor unit is
shielded.
B. Under control state," SHIELD" will be displayed during setting or giving the
shield order.
Region wired controller:" SHIELD" will be displayed when selected units are
shielded during long-distance monitoring.
"FORCE" is displayed when indoor unit is forced to run.
" " is displayed when there is no malfunction.
Room temp. value is displayed during no malfunction to selected indoor or outdoor
unit.
Error code is displayed during malfunction to selected indoor or outdoor unit.
Instruction to display
CONTROL
66