Winter Mode (Heating With Hot Water Production); Advanced Functions - Webasto Dual Top Evo 6 Operating Instructions Manual

Dual Top Evo 6
2.3

Winter mode (heating with hot water production)

The heater is used for heating the interior and production of hot water.
The heat is generated using a diesel powered burner.
The desired interior temperature may be adjusted by pushing button (1)
(2) (5 to 35 °C).
The water is heated up to 70 °C.
The device automatically selects the burner setting modulating between 1,500 W and
6,000 W depending on the output requirement (calculated from difference between
selected temperature and current interior temperature).
The amount of heat is regulated to reach the pre-selected interior temperature quickly.
Then only a limited amount of power is needed to hold the interior temperature.
A water temperature sensor controls the water temperature, while an interior
temperature sensor controls the interior temperature.
Due to variable operating and environmental influences, small water temperature
deviations are possible.
2.4

Advanced functions

• Menu driven user guidance in 6 languages.
• Programmable timer: The device offers two free programmable 7 days, 24 hours
heating programs.
or button See paragraph 3.5: "Programming timer".
• Remote control by Webasto Telestart and Thermo Call (optional controls).
See paragraph 3.6: "Remote control".
• Boiler drainage: possibility to drain the boiler manually with the control panel or
automatically as frost protection.
See paragraph 3.7: "Frost".
• Frost protection mode: protects the boiler against frost.
See paragraph 3.7.4: "Frost protection mode".
• Textual fault information: when a fault occurs, a fault message is displayed on the
control panel. A number and a brief description inform the user about the kind of
fault. See chapter 4: "Fault Message Output".
Function description
5