Webasto Dual Top Evo 6 Operating Instructions Manual page 15

Dual Top Evo 6
8 Press and to:
– select "Show 24 h Program".
Matrix with day, programmed hours and interior temperatures T1 and T2 ap-
pears.
Press BACK to return to main menu.
– or select "Modify 24 h Program".
9 Press OK.
10 Selected day and hour appear on display.
Matrix with programmable hours and interior temperatures T1 and T2 appears.
Field of actual time and temperature blinks.
11 Press or to adjust desired temperature for selected day and hour: OFF,
T1 or T2.
12 Press OK.
13 Repeat step 11 and 12 until all 24 hours are programmed.
(You will see the hour period displayed at the bottom of the screen.)
14 "Programming 24 h successful" on display.
After 3 seconds, select another day as described in step 6 and continue to
program remaining days.
It's also possible to copy programmed values from one day to another. See Day
copying, step 6.
When all days have been programmed, press BACK to return to main menu.
Day copying
Instead of programming each day individually, it's also possible to copy programmed
values from one day to another.
After copying you can leave the values identical, but it's also possible to make
adjustments (see Day setting, step 6).
In case you copy days after setting temperatures T1 and T2 or programming and setting
a day, continue with step 6.
Make sure the device is switched on.
1 Press MENU.
2 Press and to select "
3 Press OK.
4 Press and to select " Timer Program 1" or " Timer Program 2"
(values T1 and T2 depend on program settings).
5 Press OK.
6 Press and to select "Set Monday", "Set Tuesday", "Set
Wednesday" etc..
7 Press OK.
8 Press and to select "Copy Tuesday", "Copy Wednesday" etc.
9 Press OK.
Operating Instructions
Programming Timer".
15