Amprobe AM-120 TRMS User Manual page 16

15
To recall, switch on the meter, then press the start, up, or down arrow button
momentarily to "CALL" the logged data. The LCD annunciator "C" will be flashing to
indicate on screen logged data review. The logged data can also be downloaded to a
PC computer through the meter RS232C capability with the additional RSKIT1 PC
interface kit.
When in pause mode "H" or call mode "C", the following on screen data item review
features can quickly help you outline the key points of your logged data without the
help of a computer:
1) Press the up (or down) arrow button momentarily to step throughout the logged
data.
2) Press-and-hold the up (or down) arrow button can quickly scan the logged data,
and the beeper will beep continuously when the first or the last data is reached.
3) Press at the same time the up and down arrow buttons momentarily can
alternatively display the extreme maximum and minimum readings of the logged data.