Activesync -Mode; Alternative Possibility Of Charging The Battery; Working With Microsoft Activesync - Medion E3140 Operating Instructions Manual

®
ActiveSync -Mode
Repeat the attempt to connect, if it has failed the first time, if you have selected the Active-
Sync® mode.
Follow the instructions on your screen. The program will now set up a partnership be-
tween your PC and navigation system.
Note
The navigation system must have been recognized when setting up the
ActiveSync® mode, in order to be able to work with the GoPal Assistant.

Alternative possibility of charging the battery

The battery will charge as soon as you connect your navigation device to a switched-on PC
or notebook by means of a USB cable (optional). No type of software or driver installation
will be necessary for this. Do not interrupt the charging process if possible during the
initial charge.
III. Working with Microsoft
®
ActiveSync will be started automatically if you connect your navigation system to the PC.
The program will check whether the device is one with which a partnership has been en-
tered. If this is the case, the changes that have taken place on the PC and on the navigation
system since the last synchronisation will be compared and adjusted to each other. You
will be able to define exactly which data will have priority during the synchronisation in
the settings of the ActiveSync
ton), in order to become familiar with the effects of the respective settings. A restricted
Guest Access, with which you will be able to exchange data, for example, will become
active automatically if the navigation system has not been recognised as a partner. If this is
the case, although the process concerns the registered partner device, separate your navi-
gation system from the PC and switch it off and on again. Now connect your navigation
system to the PC, to restart the recognition process. Repeat the process and, restart your
PC in addition, if your device continues to be recognised as a guest.
Note
Make sure that you always connect your navigation system to your PC
with the same USB connection, otherwise your PC will allocate an
additional ID and reinstall the device.
56
®
ActiveSync
®
Program. Call up the Help of the Program (with the F1 But-
Appendix
®