Volkswagen The Golf 2004 Service Training page 52

Convenience and safety electronics
Headliner wiring with printed circuit wires
By the use of printed circuit wires, an increase in
headroom has been achieved. Routing between
the headliner and roof is uncomplicated due to
the fact that the printed circuit wiring can be
attached to the headliner. This means that
additional cable clips in the roof area are no
longer required.
Description
The printed circuit wiring connects the rear
interior light, the sun visor switch and the vanity
mirror lighting to the onboard supply system.
The central coupling point to the onboard supply
system can be found on the front cross member,
above the front interior light.
No provision has been made to repair
the printed circuit wiring. It should be
renewed in the event of a defect.
52
Sun visor switch
connection
Vanity mirror light
connection
Central coupling
point connection
Front interior light
Rear interior light
S319_073