Immobiliser control unit J362
Immobiliser IV
The immobiliser control unit J362 is integrated in
the dash panel insert control unit. With the
ignition switched on, it enables or disables
vehicle-specific functions.
The control unit can only be adapted using the
"guided fault finding" function in the diagnosis
tester VAS 5051.
Active immobiliser
If the immobiliser is active, a short audible signal
will sound and the immobiliser warning lamp will
light up in the rev counter.
The illustration shows a dash panel insert of the
Highline version
Adaption channels and fault memories are dealt
with separately.
The immobiliser requires its own address word 25
for diagnosis.
Diagnosis of the immobiliser control
unit is done via the guided fault
finding function.
S319_051
35