Table of Contents
Advertisement
A
C - E
PPENDIX
The Apollo SL50 and SL60 have been tested to the following environmental categories per
procedures defined in RTCA/DO-160C or DO-160D.
Model:
SL50
Part No:
430-6040-4xx
TSO No:
TSO-C129
Conditions
Temperature and Altitude
In-flight Loss of Cooling
Altitude
Overpressure
Temperature Variation
Humidity
Operational Shocks and Crash
Safety
Vibration
Explosion Proofness
Waterproofness
Fluids Susceptibility
Sand and Dust
Fungus Resistance
Salt Spray
Magnetic Effect
Power Input
Voltage Spike
Audio Frequency Conducted
Susceptibility - Power Inputs
Induced Signal Susceptibility
Radio Frequency Susceptibility
(Radiated and Conducted)
Emission of Radio Frequency
Energy
Lightning Induced Transient
Susceptibility
Lightning Direct Effects
Icing
Remarks:
The Apollo SL60 has been tested to the following environmental categories per procedures
defined in RTCA/DO-160D to support helicopter installations.
Apollo SL50 / SL60 Installation Manual
NVIRONMENTAL
Environmental Qualification Form
SL60
430-6040-6xx
TSO-C129, TSO-C37d,
TSO-C38d, TSO-C128
DO-160C
Description of Conducted Tests
Section
4.0
Equipment tested to Category C1 with
4.5.4
No cooling required
4.6.1
Equipment tested to 35,000 feet
4.6.3
Equipment tested for overpressure
5.0
Equipment tested to Category C, 2°C/min
6.0
Equipment tested to Category A, standard humidity
environment
7
Equipment tested for both operational and crash safety
shocks. (Equipment operated normally after the crash safety
shocks.)
8.0
Equipment tested without shock mounts to Categories B, M,
& N
9.0
Equipment identified as Category X, no test required
10.0
Equipment identified as Category X, no test required
11.0
Equipment identified as Category X, no test required
12.0
Equipment identified as Category X, no test required
13.0
Equipment identified as Category X, no test required
14.0
Equipment identified as Category X, no test required
15.0
Equipment is Class Z
16.0
Equipment tested to Categories A & B
17.0
Equipment tested to Category A
18.0
Equipment tested to Categories A & B
19.0
Equipment tested to Category Z
20
Equipment tested to Category U
21
Equipment tested to Category Z
22.0
Equipment tested to -
Category B3 for the GPS navigation connections (37 pin)
Category B1 for the GPS antenna connector
Categories A3 and B2 for the comm connections
23.0
Equipment identified as Category X, no test required
24.0
Equipment identified as Category X, no test required
Environmental Qualifications
Q
UALIFICATIONS
Manufacturer:
II Morrow Inc.
2345 Turner Road SE
Salem, Oregon 97302
43
Advertisement
Table of Contents
