Table of Contents
Advertisement
O
R
THER
EQUIRED
The SL50/60 is intended for use with standard aviation accessories. External devices required
for various installations are listed in the System Configurations section on page 4. Depending
upon the installation, this will include items such as:
· annunciators
· a CDI or HSI
· a comm antenna
· a microphone(s)
· a speaker or headphone
S
T
PECIAL
OOLS
Crimp Tool
A crimp tool meeting MIL specification M22520/1-01 and a positioner/locater are required to
ensure consistent, reliable crimp contact connections for the rear 15 pin connector. These tools
are available from:
For pin p/n 162-0100
Astro Tool Corp.
21615 SW TV Highway
Beaverton, OR 97006
Crimp tool:
Positioner:
For pin p/n 162-1575
ITT Cannon
1851 E. Deere Ave.
Santa Ana, CA 92705-6500
Insertion tool:
Regular duty Crimp tool:
Regular duty Locator tool:
Heavy duty Crimp tool:
Heavy duty Locator tool:
L
R
ICENSE
EQUIREMENTS
An aircraft radio station license is required for operation of the SL60 comm transmitter once
installed in the aircraft. An application must be submitted on FCC Form 404, which may be
obtained from the FCC in Washington, DC, or any of its field offices. Procedures for
applications are in CFR 47, Part 87, Aviation Services, Subpart B, Applications and Licenses.
Apollo SL50 / SL60 Installation Manual
M
ATERIALS
R
EQUIRED
Phone (503) 642-9853
Fax
(503) 591-7766
Astro Tool part #615708
Astro Tool part #616356
Phone (714) 261-5300
Fax
(714) 575-8324
ITT part # 274-7006-000 (Desc. CIET-20HD)
ITT part #995-0001-585 (Desc. M22520/1-01)
ITT part #995-0001-244 (Desc. TH25)
ITT part #995-0001-584 (Desc. M22520/2-01)
ITT part #995-0001-604 (Desc. M22520/2-08)
Introduction
7
Advertisement
Table of Contents
