Section 3 - Specifications; Electrical; Physical; Nvironmental - II Morrow Inc. Apollo SL50 GPS Installation Manual

Table of Contents

Advertisement

S
3 - S
ECTION
This section includes detailed electrical, physical, environmental, and performance
specifications for the Apollo SL50 and SL60.
E
LECTRICAL
Input voltage............................................. 10VDC to 40VDC, reverse polarity protected
Input current (GPS navigation input) ....... 325mA typical, 500mA max at 13.75VDC
Input current (comm input) ...................... 270mA typical, 2A max at 13.75VDC, receive
Input power (GPS navigation input)......... 4.7 watts typical
Input power (comm input)........................ 3.7 watts typical, receive
Internal fuses ............................................ Nav input: 3 amp fast blow, surface mount on board
Memory backup........................................ Internal lithium battery with a service life of
Note: The SL50/60 will provide a message on the display when the lithium battery is
running low and needs replacement.
P
HYSICAL
Height ....................................................... 1.30 inches (3.30 cm)
Width........................................................ 6.25 inches (15.88 cm)
Depth ........................................................ 11.452 inches (29.09 cm) behind panel, including
Weight (with mounting frame)................. SL50: 2.3 lb. (1.04 kg)
E

NVIRONMENTAL

The Apollo SL50 and SL60 units are designed and tested to meet appropriate categories of
RTCA/DO-160C or DO-160D. The Environmental Qualification Form is included in
Appendix C.
Operating temperature .............................. -20°C to +55°C
Apollo SL50 / SL60 Installation Manual
PECIFICATIONS
170mA typical, 350mA max at 27.5VDC
130mA typical, 900mA max at 27.5VDC, receive
2.1A typical, 3.2A max at 13.75VDC, transmit
1.0A typical, 1.4A max at 27.5VDC, transmit
Note: receive max at full receive audio, transmit
max at 90% modulation at 1000Hz
28 watts typical, transmit
Comm input : 7 amp fast blow, soldered in board
approximately 4 to 6 years. See Appendix B for
battery replacement instructions.
mounting frame and connectors
SL60: 2.8 lb. (1.27 kg)
Specifications
29

Advertisement

Table of Contents
loading

Table of Contents