Initialise - Toshiba Strata CIX IPT Administrator's Manual

IPT2008-SDL Settings
Configurations

Initialise

Select Configuration > Initialise. The Initialise
screen displays.
The general operation on the Key Repeat screens is
as follows:
• To view details of an item displayed on the
screens above, press the soft key that corresponds
to that item.
• You can toggle between all the items found on the
Initialise screen, except All Data. The item
selected is underlined.
• Selecting the All Data soft key selects all the items displayed on the Initialise
screen and all items are underlined.
Important!
• Pressing the EXEC soft key while "Network" is displayed underlined will initialise
the selected item and will rewrite the NV-RAM data and cause the screen to move
to the Resetting Selection Screen. (The Resetting Selection Screen will be
described later.)
• Pressing the EXEC soft key any item except "Network" is displayed underlined
will rewrite the NV-RAM data and go to the Configuration screen.
• If no setting change is made to the items and the EXEC key is pressed, the NV-
RAM data will not be rewritten and goes to the Configuration screen.
• Pressing the CANCEL soft key will not initialize and goes to the Configuration
screen.
• Table 6 on page 45
44
Pressing the "All Data" key twice will not cancel the selection.
shows the Initial values of Settings:
Initialize
All Data
Network
Sound
Browser
[EXEC]
Strata CIX Telephones Administrator Manual
LCD
Key Repeat
Others
Factory
[CANCEL]
PHONE CONFIG WEB
06/06