External Administration Terminal IP Address Upper Bound Setting
This screen can be used to set an External Administration Terminal IP Address Upper
Bound. External accessing is not enabled if the Upper and Lower bound IP addresses
are initial values (0.0.0.0). External accessing is enabled if the External
Administration Terminal IP address is within the Upper and Lower bound IP address
range.
1. Select Configuration > Advanced Screen 2 >
Admin_U. The External Administration
Terminal IP Address Upper Bound Setting
screen displays (shown right).
2. To change settings, follow the steps on
External Administration Terminal IP Address Lower Bound Setting
This screen can be used to set an External Administration Terminal IP Address Upper
Bound. External accessing is not enabled if the Upper and Lower bound IP addresses
are initial values (0.0.0.0). External accessing is enabled if the External
Administration Terminal IP address is within the Upper and Lower bound IP address
range.
1. Select Configuration > Advanced Screen 2 >
Admin_L. The External Administration Terminal
IP Address Lower Bound Setting screen displays
(shown right).
2. To change settings, follow the steps on
Strata CIX Telephones Administrator Manual
page
27.
page
27.
06/06
IPT2008-SDL Settings
Configurations
Admin Addr Upper Bound
0.0.0.0
:Current
:New
Backspace = Vol-Down.
[SET]
[CANCEL]
PHONE
CONFIG
WEB
Admin Addr Lower Bound
0.0.0.0
:Current
:New
Backspace = Vol-Down.
[SET]
[CANCEL]
PHONE
CONFIG
WEB
35