Toshiba Strata CIX IPT Administrator's Manual page 58

IPT2008-SDL Settings
Configurations
ADM/DEBUG Mode Screen
1. Select Configuration > Factory > IADM/DEBUG
Mode. The ADM/DEBUG Mode screen displays.
2. Press the DEBUG or ADM soft keys to change
the set value.
3. Press the SET soft key to accept the change.
...or press the CANCEL soft key to cancel the
change.
The setting is underlined in the Factory Setting
screen display.
Display/Key Test
1. Select Configuration > Factory > Display/Key
Test. The Display/Key Test Mode screen displays.
2. Press the soft key next SK01~SK14.
The SKxx displays in the center of the screen
(Key Test mode shown right).
3. Select the LCD on the Display/Key Test Mode
Screen, then the screen to move to the Display
Test Mode Screen. (See
Notes
• Pressing the SK01~SK14 soft keys, seven test patterns appear.
• When the SK01~SK14 soft key is pressed seven times, the screen returns to the
Display/Key Test Mode Setting Screen.
4. Select the EXIT on the Display/Key Test Mode Screen to close the Display/Key
Test Mode Screen and to go to the Factory Setting Screen (TEST tab disappears).
48
Figure on page 49).
Strata CIX Telephones Administrator Manual
ADM/DEBUG Mode
DEBUG
ADM
[SET] [CANCEL]
PHONE CONFIG
SK01 LCD EXIT
SK03
SK05
DISPLAY/KEY
TEST MODE
SK07
SK09
SK11
SK13
WEB
SK02
SK04
SK06
SK08
SK10
SK12
SK14
06/06