Bosch VIP X1 XF Installation And Operating Manual page 93

VIP X1 XF
View Control
Control options for peripherals (for example a pan/tilt head or dome camera) depend on the
type of unit installed and on the configuration of the VIP X1 XF.
If a controllable unit is configured and connected to the VIP X1 XF, the controls for the
peripheral are displayed next to the video image.
1.
2.
Digital I/O
The alarm icons Input 1 and Input 2 are for information purposes and indicate the status of an
alarm input: When an alarm is triggered, the corresponding icon lights up blue. The unit's
configuration determines whether the alarm is displayed, as well as additional details (see
Section 5.15 Advanced Mode: LIVEPAGE Functions, page 40).
Triggering Relay
You can switch connected units using the relays in the VIP X1 XF (for example lights or door
openers).

Bosch Sicherheitssysteme GmbH
To control a peripheral, click the appropriate controls.
Move the mouse cursor over the video image. Additional options for controlling
peripherals are displayed with the mouse cursor.
To activate this, click the icon for the corresponding relay next to the video image. The
icon will be red when the relay is activated.
Installation and Operating Manual
Operation | en 93
DOC | V4.1 | 2010.02