Table of Contents
Advertisement
3.4 Connecting power
Please use the supplied power adapter to connect DVR.
4.1 System Initialization
After connecting the power adapter and pressing the power button, the system will be turned
on.
Note:
You must enter the main menu and select HDD Management to format the hard disk.
4.2 Main interface
After turning on the system will enter main interface. Picture 4-1 is the main interface
defaulted by system. Once there are video inputs, the interface will display live images from the
channel; if not video input, the interface is blue. In the main interface, double-click any channel, the
image will be maximized to full screen, by double-click again, image will come back to multiple
display mode; clicking the right button of mouse then will enter Pop-up Menu, move the cursor to
select menu, then click the left button to enter the selected menu or carry out the functions.
4.3 Right-click Menu
After start-up of the system, click right button of mouse in the main interface, through pop-up main
menu, user could perform parameter setting and operate on the main menu, e.g., main menu, video
search, PTZ control, manual record, switch of single channel and multi-channel, shown as picture 4-2.
16 Channel Embedded Digital Video Recorder User Manual
Chapter 4
Basic Operations
Picture 4-1
www.i-tesco.co.uk
6
Advertisement
Table of Contents
