Network Setup - i-Tesco 16 Channel Embedded Digital Video Recorder User Manual

Table of Contents

Advertisement

4.7.4 Network setup

Enter [main menu]→ [network setup], the interface shown as picture4-23.
1) Basic setup: Connection Mode, IP address, Net mask, Gateway, NTP Server, HTTP Port, Media
Port,
(1)
Connection Mode: Dynamic IP and Static IP
Static IP refers to the IP address, Net mask and Gateway assigned manually, this requires
that we're going to apply for an IP address from network administrator. Dynamic IP refers
to IP address assigned by the Dynamic Host via DHCP, you don't need to set IP, Gateway
or Netmask manually.
Setting method: Press the arrow key to select [Connection mode], popup dropdown menu
of PTZ, and then press the arrow key to choose the connection mode with PTZ key.
(2)
IP/ GATEWAY /NETMASK Setup
Only when the Static IP is selected as network connection mode, then
IP/GATEWAY/NETMASK could be activated.
Setting method: Move down to IP, and press the PTZ to popup the edit menu, enter the
desired IP. Setup of Netmask and Gateway is same way.
(3)
NTP Server address setup: to realize DVR's time synchronization.
Setting method: Press arrow key to select "NTP Server"
Server→ enter the address in the interface, finally, click "Enter".
(4)
Port Number Setup: HTTP Port, Media Port and Intercom Port.
Setting method: Press the arrow key, enter "HTTP Port", and press the PTZ to popup the
edit menu, input port number ( between 1024-65535) , finally, click
Media Port and
Note: When forwarding the ports in the WAN setting with the UPNP function option off, then four
ports need to be forwarded. The defaulted setting are as below: 8000,40001,40002,40003.
If you have two or more DVR in the same network you must change the "MAC Addr" and
ports to avoid conflict.
EX:
DVR1
HTTP port 8000
DVR2
HTTP port 8001
16 Channel Embedded Digital Video Recorder User Manual
Intercom Port is the same way.
Media port 40001 40002 40003 Mobile port 6000
Media port 41001 41002 41003 Mobile port 6001
Picture 4-23
www.i-tesco.co.uk
→ enter PTZ→ select NTP
"Enter". Setup of
19

Advertisement

Table of Contents
loading

Table of Contents