Channel Setup - i-Tesco 16 Channel Embedded Digital Video Recorder User Manual

5）Video Loss
Click DISPLAY to "Video Loss", shown as picture 4-20.
Video Loss: When there is video loss of one channel, DVR will alarm to remind the user.
(1) Press the arrow key to select [Alarm Output], enter PTZ to choose action port, and press
"Enter" to exit.
(2) Buzzer setup: To check DVR whether enable beep when set event trigger. Select
"Buzzer", press PTZ to open dropdown menu and arrow key to choose ON/OFF. If select
ON, the buzzer is activated; if select OFF, the buzzer is invalid. When the event is
finished, the buzzer is off automatically.
(3) Event duration means the duration of alarm when the start of event setup. Press the
arrow key to select [Event Duration], popup dropdown menu with PTZ, and then press the
arrow to choose working time. There are following options:
（3/5/10/20/30/60/120/180/300/600/900/1200 S） , while the system default is 10 seconds.
Finally, press ON/OFF to apply selected time with PTZ.
(4) Setting the above parameters, press the arrow key to Enter and PTZ to save the
parameters.

4.7.3 Channel Setup

Click "Main Menu"
following options: Channel number, Channel name, PTZ protocol, Baud rate, PTZ address code and
color setup.
1. Channel number: Press the arrow key to select "Channel number", and press PTZ to apply
the selected channel.
2. Channel name: Press the arrow key to select "Channel name" and PTZ to popup the edit
menu( Chinese, English, Numeric, Special character can be input as channel name), if
input numeric or lower case, just use the arrow key to select directly; if input capital letters,
user should press
character, press the
press "En" of edit menu to switch to Chinese input. 16 characters are supported.
3. PTZ Protocol: This protocol is used to realize the communication with PTZ. In order to
control PTZ cameras, PTZ should be connected with PTZ port of DVR. Press the arrow
key to select "PTZ Protocol"and PTZ to popup the dropdown menu, with the click of arrow
16 Channel Embedded Digital Video Recorder User Manual
Picture 4-20
→ "Channel Setup" , the interface is shown as picture
" " of edit menu to switch to capital input; if input special
Caps
",." of edit menu to switch to special character input; if input Chinese,
www.i-tesco.co.uk
4-21.There are
17