Alarm Setup - i-Tesco 16 Channel Embedded Digital Video Recorder User Manual

Alarm Record, tick "√".
（3）
Move cursor to any time options; select time area.
（4）
If apply all settings to other channels, just move cursor to "Copy to" to copy the settings to
one channel or all channels.
（5）
Move cursor to "Enter" to save above settings.

4.7.2 Alarm Setup

1）Alarm In
Alarm Channel: chose the alarm channel.
Sensor Type: depending on the Sensor you can select „Normal Open‟ or „Normal Close‟.
Record: setup the record channel if the alarm was activated.
Alarm Out: select the alarm output channel on the bottom panel.
Buzzer: control the Buzzer working time .
Action PTZ: when the sensor responses alarm the DVR can quickly control the PTZ camera
moving to the preset position. You must set up the preset position in PTZ cannel before work well.
Disp-Video: setup the video pup-up channel displaying on the main screen if the alarm happen.
Event Duration: setup the alarm continues time.
2）Motion Detection
In motion detection, except the setup of sensitivity and MD area, settings of other functions as same
as alarm input, users could follow the former sections. Next mainly introduce the setting of sensitivity
and MD area.
16 Channel Embedded Digital Video Recorder User Manual
Picture 4-14
Picture 4-15
www.i-tesco.co.uk
14