Summary of Contents for i-Tesco 16 Channel Embedded Digital Video Recorder
- Page 1 Security Company 16 Channel Embedded Digital Video Recorder User Manual...
-
Page 2: Table Of Contents
........................ 28 Installation of the plug-in unit as prompted......................28 5.2 IE Login ..................................29 5.3 IE interface ................................30 5.3.1 Menu Bar ..............................30 16 Channel Embedded Digital Video Recorder User Manual... -
Page 3: Notes
◎ One piece of product instruction ◎ Several SATA hard disk data cables ◎ One DC12V/5A power adapter ◎ HDD support (already installed) and a set of mounting screws. ◎ One piece of CD 16 Channel Embedded Digital Video Recorder User Manual... -
Page 4: Chapter 1 Dvr Instruction
Support video signal loss alarm; automatic password protection for the sake of illegal operation; ◎ Support USB flash drive and HDD backup; ◎ Support 2 SATA HDD, capacity of single one is to 2T; ◎Support auto recovery when power off or reset 16 Channel Embedded Digital Video Recorder User Manual... -
Page 5: Specifications
Support Windows, Symbian, IPhone, Android, blackberry Remote controller Support 2 USB interfaces User authority Support multi-level user authority distribution Support Power DC12V/5A Working temperature -10℃ - 60℃ Working humidity 10%－90% SIZE(mm) 430(w)*345(d)*66(h) 16 Channel Embedded Digital Video Recorder User Manual... -
Page 6: Dvr Introduction
HDMI Power DC12V/5A ○ ○ Intercom audio input ○ ○ Audio output Power switch ○ ○ Video input Sensor input ○ ○ Video output Alarm output ○ ○ USB / RJ45 Ethernet 16 Channel Embedded Digital Video Recorder User Manual... -
Page 7: Remote Controller (Only For Reference)
Pop up right click menu ● Manual record ■ Stop Fast forward Fast reverse One frame fast forward One frame back forward Enter log search interface Spare key SPOT Spot output 16 Channel Embedded Digital Video Recorder User Manual... -
Page 8: Chapter 3 Installation
1 2 3 4 5 6 7 … … G ND Alarm output open connection: Sound and light alarm Response output Power supply Note: All of the input and output signals are switch 16 Channel Embedded Digital Video Recorder User Manual... -
Page 9: Connecting Power
After start-up of the system, click right button of mouse in the main interface, through pop-up main menu, user could perform parameter setting and operate on the main menu, e.g., main menu, video search, PTZ control, manual record, switch of single channel and multi-channel, shown as picture 4-2. 16 Channel Embedded Digital Video Recorder User Manual... -
Page 10: User Login
1) Search by time, enter the date time, then click 'play' button to play the record file of this time. If no record file in this period, there will pup-up a system note 'File open error' 16 Channel Embedded Digital Video Recorder User Manual... - Page 11 Picture 4-5 Select one of the files in the list, pop up the following note: Picture 4-6 Click Playback to enter the playback as shown in the following image: 16 Channel Embedded Digital Video Recorder User Manual...
-
Page 12: Backup
USB or DVD RW. If the 'File Backup' is selected, please click one of the files in the list as shown in image4-6, then click 'File Backup‟ to enter the interface as shown in image 4-8 Picture 4-8 16 Channel Embedded Digital Video Recorder User Manual... - Page 13 2. To identify USB hard disk or USB flash disk, the back-up device should be formatted by FAT32 . 3. The total file size must less than the device‟ capacity. 16 Channel Embedded Digital Video Recorder User Manual...
-
Page 14: Overview Of Main Menu
Multi-channel Channel Next screen Network Password Start record User Video loss Record Search MENU Basic PTZ Control System Advanced Intercom Display Basic Digital Zoom Advanced System Inform Maintain System Reset System Event 16 Channel Embedded Digital Video Recorder User Manual... -
Page 15: Main Menu
Copy to channel: after the setting of parameter of one channel, parameters of other channels are accordance with the first one channel, and then could use this item to copy the parameters of first one 16 Channel Embedded Digital Video Recorder User Manual... - Page 16 There are 24 time periods and one hour per time period. Setting method: （1） Press the arrow key to "Channel" to popup the interface. （2） Move cursor to any options: such as Off, Schedule Record, Alarm Record, and Schedule & 16 Channel Embedded Digital Video Recorder User Manual...
-
Page 17: Alarm Setup
In motion detection, except the setup of sensitivity and MD area, settings of other functions as same as alarm input, users could follow the former sections. Next mainly introduce the setting of sensitivity and MD area. 16 Channel Embedded Digital Video Recorder User Manual... - Page 18 (2) Press the arrow key to select the starting point of motion detection and PTZ to apply the choice, and move the cursor to choose desired motion area, then enter "ESC" to exit the interface, at last, press "Enter" to save above settings. Picture 4-17 16 Channel Embedded Digital Video Recorder User Manual...
- Page 19 4）Password Error Click DISPLAY to "Password", shown as picture 4-19. Password Error means that the current user or other users input wrong password, DVR will alarm to remind the user. Picture 4-19 16 Channel Embedded Digital Video Recorder User Manual...
-
Page 20: Channel Setup
3. PTZ Protocol: This protocol is used to realize the communication with PTZ. In order to control PTZ cameras, PTZ should be connected with PTZ port of DVR. Press the arrow key to select "PTZ Protocol"and PTZ to popup the dropdown menu, with the click of arrow 16 Channel Embedded Digital Video Recorder User Manual... - Page 21 After the adjustment, press ESC to exit the interface, in the end, press the arrow key to select "enter" and save the settings with the click of PTZ. (shown as picture 4-22) Picture 4-22 16 Channel Embedded Digital Video Recorder User Manual...
-
Page 22: Network Setup
If you have two or more DVR in the same network you must change the “MAC Addr” and ports to avoid conflict. DVR1 HTTP port 8000 Media port 40001 40002 40003 Mobile port 6000 DVR2 HTTP port 8001 Media port 41001 41002 41003 Mobile port 6001 Picture 4-23 16 Channel Embedded Digital Video Recorder User Manual... - Page 23 & PTZ, open the [DDNS] menu. b) Set DDNS type, server address, domain name, user name, password and password confirmation respectively, at last, press Enter and PTZ to save above settings. 16 Channel Embedded Digital Video Recorder User Manual...
-
Page 24: User Management
(3)If one of the users is to be edited or deleted, press the Arrow Keys to select this user, then press PTZ key to set the user as the selected status. Move the cursor to the User-delete button or edit button, 16 Channel Embedded Digital Video Recorder User Manual... -
Page 25: System Setup
When using special keyboard or IR remote control to dominate several DVRs, the machine ID is needed. (At present, this function is not available in remote control) Setting Method : Press the Arrow Key to select Machine ID Column, press PTZ button to pop up the drop-down 16 Channel Embedded Digital Video Recorder User Manual... - Page 26 Press the Arrow Keys to select auto lock column, press PTZ key to pop up the drop-down menu, and then press the Arrow Keys to select the intervals. The intervals are optional（0/1/3/5/10/30/） minutes, the default setting is 0 minute. 16 Channel Embedded Digital Video Recorder User Manual...
- Page 27 Then you can restart the machine. 3) Unplugging and plugging the USB disk is forbidden during the updating process, or the device could not continue updating or start. 16 Channel Embedded Digital Video Recorder User Manual...
-
Page 28: Display Setup
Setting Method : Press the Arrow Keys to select display resolution(Resolution) column, press PTZ key to pop up the drop -down menu, press the Arrow Keys to select the video output resolution, then press PTZ key to apply the selected settings. 16 Channel Embedded Digital Video Recorder User Manual... -
Page 29: Log Search
4-35. The speed of PTZ could be set. The arrow buttons is used to control the direction of the high-speed ball movement, press "+","-" button to control zoom, focus, iris. 16 Channel Embedded Digital Video Recorder User Manual... -
Page 30: System Information
Open your IE browser, enter the IP address and web port of DVR. Ex:http://192.168.xxx.xxx:8000/ then press ENTER key, if your computer is connected to internet, you will be prompted to download and install "ActiveX Control" 16 Channel Embedded Digital Video Recorder User Manual... -
Page 31: After Setup, Enter The Ip Address In The Ie
④cancel the optional ⑦ click ⑧ All selected "Enable" ⑨ After setup, enter the IP address in the IE address bar, and complete the automatic Installation of the plug-in unit as prompted. 16 Channel Embedded Digital Video Recorder User Manual... -
Page 32: Ie Login
"LOGIN" to view DVR remotely. The default password：00000000 Picture 5-1 Picture5-2 Indicator Function Indicator Function LIVE live Intercom PLAYBACK Play back menu Record SETUP Setup menu Auto Up,Down,Left,Right ZOOM FOCUS IRIS Full screen PRESET Snap CALL PRESET 16 Channel Embedded Digital Video Recorder User Manual... -
Page 33: Ie Interface
,then click "download" button, the files saving path is set in the local setting interface as shown in picture 5-14. Picture 5-3 Setup: Click "setup",select the remote configuration, as shown in picture 5-4 16 Channel Embedded Digital Video Recorder User Manual... - Page 34 Users can set the main display switching time, SPOT switching time, HDD loss ignoring, display resolution and OSD output device in the interface. Setting Method is the same with that of DVR, please refer to 4.7.7. 16 Channel Embedded Digital Video Recorder User Manual...
- Page 35 Click "System Configuration"→ "Channel Setting" to enter channel setting interface as shown in below picture. Users can set the channel name, PTZ protocol, PTZ Baud rate, PTZ address and the color in the interface. The Setting Method is consistent with that of DVR end. 16 Channel Embedded Digital Video Recorder User Manual...
- Page 36 Users can set recording resolutions, definition, frame rate, sound recording, pre-recorded frame rate, superposition information and cycle covering in this interface. The Setting Method is consistent with that of DVR end. Please refer to 4.7.1 Basic Setting. 16 Channel Embedded Digital Video Recorder User Manual...
- Page 37 The HDD error, password error and video loss interfaces are almost consistent shown as the below picture. Picture 5-10 The alarm input interface is as shown in the below picture 16 Channel Embedded Digital Video Recorder User Manual...
- Page 38 The motion detection interface is as shown in the below picture Picture 5-12 c. User Management indicates the adding, deletion and modification of the users. User management interface is as shown in the below picture 16 Channel Embedded Digital Video Recorder User Manual...
-
Page 39: Ptz Control
It supports single screen, four screens, nine screens, 16 screens and full screen operation. As shown in picture 5-2. 5.3.4 Playback Under the state of live preview, click the "Playback" button to enter record query interface. Click 16 Channel Embedded Digital Video Recorder User Manual... -
Page 40: Snapshot
5.3.5 Snapshot Under the state of live preview, click the "snapshot" botton, Can operate the snapshot of the current previewed picture. As shown in picture 5-2 . 16 Channel Embedded Digital Video Recorder User Manual... -
Page 41: Client Software Login
Offline: Offline Play Function can play backup record file The operation interface of the Client Software after logging is just the same of the interface on IE. Please refer to the setting and operation method of IE 16 Channel Embedded Digital Video Recorder User Manual... -
Page 42: Chapter 6 Troubleshooting
A: Check the motion detection time and motion detection zone and make sure that they are right setup, and check the sensitivity setting. 13. Why does the Buzzer keep sounding? A: Please check if motion detection is on and the system has detected motion, make sure the HDD is 16 Channel Embedded Digital Video Recorder User Manual... -
Page 43: Appendix 1 Domain Name Application
Click the link below and enter the website to activate the account. Login After successful activation, open the home page http://www.dyndns.com/ to log in. After successful login, click “Services” →“Dynamic DNS”, as shown below: 16 Channel Embedded Digital Video Recorder User Manual... - Page 44 After entering the “Dynamic DNS Services” screen, click “Dynamic DNS Free” to apply for a free dynamic domain name, as shown below: Enter the “Dynamic DNS Free” screen, as shown below. Click “ ”. 16 Channel Embedded Digital Video Recorder User Manual...
- Page 45 IP address of the network of the DVR host) to be tied in the Add New Hostname screen, as shown below. Complete the application for the dynamic domain name as prompted. 16 Channel Embedded Digital Video Recorder User Manual...
-
Page 46: Appendix 2 Player
Image print Stop Image save Play speed Play bar Open file Fast backward Display mode Backward play 1~16 Channel Step backward Audio Step forward :about Play :full screen Fast forward :minimize Pause :Exit 16 Channel Embedded Digital Video Recorder User Manual... - Page 47 16 Channel Embedded Digital Video Recorder User Manual...