i-Tesco 16 Channel Embedded Digital Video Recorder User Manual page 21

key to choose appropriate protocol and enter PTZ to apply the selected protocol.
There are a number of protocols could be used: PTZ-NULL, LG LPT-A100L,
DRX-502A(Demo), PELCO D, NK-97CHE, SAMSUNG SCC-641, PELCO P, SJ2819RX,
SAMSUNG MRX-1000, Techwin SPD1600/2500, Wonwoo Eng: SBO-201P1, Panasonic
WV-CS850.
4. Baud Rate: Press the arrow key to select [Baud Rate], popup dropdown menu, and then
press the arrow key to choose appropriate baud rate, at last, enter PTZ to apply the
selected baud rate.
5. PTZ ID: Press the arrow key to select [PTZ ID], popup dropdown menu with click of PTZ,
and then press the arrow key to choose the number, finally enter PTZ to apply the selected
number. PTZ IP ranges from 0-255.
6. Color Setup: Through the setup of color, bright contrast, saturation, hue to set the display of
channel.
Press the arrow key to select [Color setup] and PTZ to enter the interface. With the click of arrow key to
chose bright, contrast, saturation, hue respectively and use the right and left keys to adjust number.
After the adjustment, press ESC to exit the interface, in the end, press the arrow key to select "enter"
and save the settings with the click of PTZ. (shown as picture 4-22)
16 Channel Embedded Digital Video Recorder User Manual
Picture 4-21
Picture 4-22
www.i-tesco.co.uk
18