7.
Fit the rotating rod onto the notched area around the screw. Add the center knob
and turn until secure. Make sure rotating rod turns freely.
8.
The Popcorn Popper is now ready for use.
9.
Do not force the center knobs into the center stem when re-assembling the unit
as it may damage or break the center stem.
10. note: When your popcorn maker is heated for the first time, it may emit slight smoke
or odor. This is normal and should disappear after 1 or 2 uses. This does not affect the
safety of the appliance. However, as it may affect the flavor of the first batch of popcorn,
it is recommended that these be discarded.
Center Knob
Rotating Rod
Center Stem
Screw
5
Figure 2