Figure 18. The Correct Paper Feeding Path On The Ioline Flexjet Printer; Feeding Paper - Ioline FlexJet User Manual

Feeding Paper

Figure 18 represents the proper paper path. The diagram on the left
shows the paper after it is inserted properly and taped to the take-up
shaft. The figure on the right shows the result after the dancer bars
are inserted.
1. Remove any printed markers from the take-up shaft and make
sure the carriage is parked in the Service Station before feeding
the paper. (To park the carriage, press Start/Stop. Wait for the
OK light to turn red and press the Clean button.)
2. If the pinchwheels are lowered, raise them by pushing the
pinchwheel lever away from the machine.
3. Pull a long leader of paper off of the paper roll and insert it
through the stand, behind the plotting head, over the rear top
bar, and between the platen and pinchwheels.
4. Temporarily lock the paper in place by pulling the pinchwheel
lever toward the machine to lower the pinchwheels.
Platen
Take-up
Shaft
Feed Roll
Proper Paper Path
After Loading

Figure 18. The correct paper feeding path on the Ioline FlexJet Printer.

Pinchwheel Lever
Rear Top Bar
Front
Dancer Bar
Front Top Bar
Rear (Heavy)
Dancer Bar
Paper Path when Ready to Plot
and Dancer Bars installed
31
Chapter 3: Operation