Loading Paper - Canon Pixma iP5200 Quick Start Manual

Loading Paper

This section describes how to load A4 (Letter) size plain paper in the Auto Sheet Feeder. When performing
the print head alignment, you need to load paper in the Auto Sheet Feeder.
• Always load paper in portrait orientation. Loading paper in landscape orientation can cause the
paper to be jammed.
• Cutting plain paper to 4" x 6" / 101.6 mm x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, or 2.13" x 3.39"
/ 54.0 x 86.0 mm (Credit Card) size for a trial printing can cause paper jams.
Paper Support
Auto Sheet
Feeder
Paper
Output Tray
Cover Guide
print side
• Other than the Auto Sheet Feeder, you can load paper in the Cassette. For information on loading
the print media in the Cassette, refer to the User's Guide.
• You can select the paper source also from the printer driver. For details, refer to the Printer Driver
Guide.
1
Pull out the Paper Support and Paper
Output Tray completely as shown.
Push the Top Button above the Paper Output Tray. The
Paper Output Tray automatically opens.
2
Load the paper and align it with the
Cover Guide on the right side of the
Paper Support.
You can load up to 150 sheets of plain paper (64 gsm).
Do not exceed this limit.
3
Slide the Paper Guide against the left
side of the paper stack.
Ensure that the Cover Guide stands when you load
paper in the Auto Sheet Feeder.
4
Ensure that the Auto Sheet Feeder
Lamp is lit. If not, press the Paper Feed
Auto
Switch.
Sheet
Feeder
You now need to install the printer driver:
Lamp
Windows
Mac
®
: Go to page 6
®
OS X: Go to page 9
5