Cmyk Simulation Profile - Oki ES3640e Color Manual

1
1-10 Fiery Colour Management
• instructs the Fiery to allow the RGB sources you defined elsewhere, such as in
None
the application, to be used. When you set RGB Source to None, the appearance of
colours will not be independent of the file type. For example, RGB EPS files will
look different from RGB TIFF files.
With RGB Source set to None, PostScript RGB data that contains a source colour
space definition is converted using the CRD specified by the Rendering Style option
(see page 1-5). Non-PostScript RGB data and PostScript RGB data that does not
contain a source colour space definition are converted using a general undercolour
removal (UCR) conversion method.

CMYK Simulation Profile

The CMYK Simulation Profile print option allows you to print press proofs or
simulations. This setting specifies the offset press standard or other colour printing
device that you want to simulate. This option affects CMYK data only.
With the Windows printer drivers, you can also view an unlimited number of custom
Full simulations created using ColorWise Pro Tools. On Mac OS computers, you can
view up to 10 Full custom simulations. The number of custom simulations is limited
by the disk space on the ES3640e MFP.
If you are printing with the PostScript driver from a Windows computer and have
Two-Way Communication enabled, the name of each downloaded or custom profile is
represented in the CMYK Simulation Profile setting menu. If you are printing with the
AdobePS driver from a Mac OS computer, downloaded or custom profiles appear as
Simulation-1 through Simulation-10. For more information on Two-Way
Communication, see the
The None setting sends your original CMYK data to the printer in its calibrated state,
without conversions to simulate another printer.
The CMYK Simulation Profile setting you specify depends on the press standard for
which the CMYK data was separated.
• For images that were separated using a custom separation (such as a separation
produced with an ICC profile), choose the corresponding profile on the
ES3640e MFP with the CMYK Simulation Profile setting.
• For images that were separated for SWOP, choose SWOP as the CMYK Simulation
Profile setting.
User Software Installation Guide Chapter 1.