Functional Elements; Parking Stand; Active And Passive Positions; Parking Stand Height Adjustment - ProActiv NJ1 Operating Instructions Manual

Operating instructions NJ1 e-assistant
The product may only be adapted and
detached on dry, stable and flat surfaces.

18 Functional elements

18.1 Parking stand

18.1.1 Active and passive positions

By pressing down and turning the operating
lever, the parking stand positions can be
changed from the active to the passive posi-
tion, or vice versa.
Figure 2: Press down and turn the operating lever
Figure 3: Parking stand in the active position
Figure 4: Parking stand in the passive position

18.1.2 Parking stand height adjustment

It is important to adjust the height of the park-
ing stand to bring the adapter into the right
position in relation to the product's docking
plate. Height adjustment is made by loosening
the M6 oval head screw (SW 4 mm) and ad-
justing the position of the adjustment inlet.
Finally, tighten the oval head screw up to 7 Nm
of torque.
Figure 5: M6 oval head screw and adjustment inlet
to adjust the height of the parking stand
M6 oval
head screw
Adjustment
inlet
10