Table of Contents
Advertisement
11. REPLACING BATTERIES IN BELT-PACK
TRANSMITTER
Replacing the Batteries:
1. Open the battery compartment
door by depressing the latches on
each side of the transmitter.
2. Remove or replace the batteries
and snap the door shut. The
belt-pack requires two AA sized
batteries.
3. Note the polarity in the battery
compartment.
IMPORTANT: Replace batteries
with the same type, (alkaline or
NiMH), that were installed in your
Handheld Microphone. Lightspeed
recommends Panasonic or Energizer
batteries. Duracell may not work
properly.
22
Advertisement
Table of Contents
