Table of Contents
Advertisement
8. CHANNEL SELECTION: BELT-PACK
TRANSMITTER
Channel Selection:
Once a channel has been selected
on the receiver, you now need to
select that same channel on the Belt-
pack transmitter.
1. Turn the transmitter power ON by
sliding the PWR button to ON.
2. Open the battery compartment
door by depressing the latches on
each side of the transmitter.
3. Use the screwdriver channel set
to switch to the current channel
shown on the receiver.
Transmitters and receivers are
available in 3 different frequency
groups (620, 640, 660 MHz). Verify
that the frequency group of the
receiver matches the letter code
on the silver sticker in the battery
compartment of the transmitter.
Model Number: BP016
Serial Number
BP01614324024
FREQUENCY 660 MADE IN TAIWAN
19
Advertisement
Table of Contents
